specification

brand : mayatech

látka zbužuží velmi vysoké objekcije : none

technical parameters : value 2

properties pohonu všech chytr kol : montáž

Size : 108*105*76 mm

parts for rc models : battery chargers

use : vehicle and toys na remote control

for vehicle type : aircraft

Origin : Mainland China

actualized díly/příslušenství : lithium battery

periferie/zařízení pro remote control : chargers batteries

quantity : 1 pc.

material : plastic

accessories for tools

model number : d6 pro

safety precautions when using lithium batteries/chargers

① when charging, stay away from hot materials and charge in an open and ventilated place!

② avoid charging at high/low temperatures;

③ batteries that have already had charging interruptions should be immediately disposed of in an ecological way and cannot be used again;

④ connecting the positive and negative poles can cause battery disconnection and explosion hazard;

⑤ the user is responsible for any damage or injury to the battery;

⑥ neprebíjejte ani nevybíjejte. battery damage caused by prébijnjem or vybijnjem lidskou osbou cannot be replaced;

⑦ when using a balanced charger for charging, make sure that it is properly connected in accordance with the requirements. incorrect charging methods may cause damage to the battery and even cause accidents.

battery consumption warning:

the operating voltage of lithium batteries must not fall below 3.6 v/s, otherwise it will cause permanent damage or even destroy the battery.

① dual-channel simultaneous output, capable of charging two batteries simultaneously without mutual interference, independent output, capable of charging batteries of different voltages, capacities and brands separately. Simply put, this is the integration of two 325w chargers.

② The Chinese menu is displayed on the big screen and the charging status setting is clear at first glance. it can be set in Chinese and English.

③ reserved usb upgrade interface, which can update the charger system at any time,

④ equipped with a 5v2a usb output interface, it can be connected to digital devices for fast charging.

⑤ supports wireless charging, allowing mobile phones to be charged as soon as they are released, making it convenient, simple, and fast.

⑥ use the mobile app to set up charging.

difference between d6/d6 pro:

d6

external power supply is required, which can be supplied by a power pack or a switch power supply. the input voltage range is 6.5-30v

d6 pro

built in 200w power supply

(note: it is not a built-in battery) the rest is the same as d6. it is also possible to connect an external switch power supply or battery pack to achieve greater working power.

specification

brand: hota

model no. d6 pro

input voltage:ac 100 ~ 240v / dc 6.5 ~ 30v

charge current 0.1~15a × 2

charge power：dc 325w × 2(650w)

ac 200w（support power distribution）

discharge power nternal discharge:15w × 2(balance port 10w）

external discharge:325w × 2(650w)

battery type: lihv/lipo/life/lilon/lixx: 1 ~ 6s

nizn/nicd/nimh : 1 ~ 16s

smart battery : 1~6s

lead acid(pb) : 2~24v

enelop : 1~16s

balance current ：max 1600ma × 2

discharge current 0.1~3a × 2

external discharge current 1~15a × 2

usb output: 5v / 2.1a

dimensions :108 × 105 × 76mm

net weight ：555g

instructions for charging two channels simultaneously, but not fully charged at the same time

the power of the two channels is automatically allocated. if you operate channel 1 first and then channel 2, then channel 2 will be satisfied first, which means that the power of channel 2 will be higher, and vice versa.

for example, if you set 15a charging for channel 1, the power of channel 1 may directly increase to around 170 180w. if you also set 15a for channel 2, the power of the power supply will automatically meet the requirements of channel 2 for your subsequent operation. as a result, the power of channel 1 will automatically decrease, and the current will also decrease accordingly.

the difference between d6 and d6pr0 chargers is that d6 is a single charger that requires a dc power supply to be used

d6pr0 is a built-in power supply that can be used for household electricity. in addition, d6pr0 also supports external power supply

both chargers support battery internal resistance detection function

d6 pro

built in 200w power supply, the rest is the same as d6, and can be connected to an external switch power supply or power pack to achieve greater working power

d6 charger

external power supply is required, which can be connected to a switch power supply or a power pack. the input voltage range is 6.5-30v

hota d6 pro (except for the color difference, the outer packaging and product size and weight of d6 pr0 are the same)

hota d6