„Lumenier ELITE PRO 100A V2 6-12S BLHeli_32 4-in-1 ESC X8 Cinelifter FPVdronass“ skirtas RC FPV dronams, lėktuvams ir kvadrokopteriams

apie šį produktą

„lumenier elite pro 100a v2 12s blheli_32 4-in-1“ esc yra galingas esc su naujausia blheli_32 technologija + telemetrija ir srovės jutikliu, galinčiu tiekti 100 a nuolatinę srovę ir iki 12 s (52 v) įvestį. cnc aliuminio radiatorius užtikrina puikų aušinimą, reikalingą didelės galios sistemoms, dažnai naudojamoms kino teatruose ir sunkiasvorių krovinių dronams. 4-in-1 konstrukcija supaprastina diegimą, nes vienoje plokštėje galima prijungti 4 esc su paprastu „plug-and-play“ laidu, skirtu prijungti prie skrydžio valdiklio, ir blheli_32 perdavimu, kad būtų lengva programuoti ir atnaujinti programinę įrangą. jei ieškote maksimalios galios ir našumo savo dronui ar orlaiviui, šis esc kaip tik jums.  

• nauja, tvirtesnė 16 v bec grandinė. be problemų susidoroja su įtampos šuoliais!

• patobulinta radiatoriaus konstrukcija optimizuotam aušinimui ir lengvesniam montavimui

• palaiko „dshot300“, „dshot600“, „dshot1200“, kelių kadrų, vieno kadro ir įprastus ppm 1–2us

• vienpusis mosfet dizainas sumažina triukšmą ir užtikrina geresnį šilumos išsklaidymą

• superb pcb circuit design and 8oz thick copper ensures high-current capability

• cortex m4 32-bit processor runs with 120m hz frequency

• high-voltage low resistance 100v, 1.5mω mosfet

• 30.5×30.5m and 86x66mm mounting patterns

• supports high demag compensation

• 16v bec onboard to power flight controller

• 12s high-voltage support (52v)

• supports bidirectional + dshot

• optimized blheli_32 firmware

• supports pwm 8-48khz

high performance custom heatsink

the custom heatsink design provides improved heat dissipation making this esc a perfect choice for high power needs found in cinelifters, large dronasss, and high-performance racing dronasss. the heatsink effectively cools the esc allowing for reliable operation even in challenging environments.

blheli_32 firmware and live telemetry

the lumenier elite pro 100a 12s blheli_32 4-in-1 esc is a 32-bit esc running the latest generation blheli_32 firmware. the 32-bit architecture enables the esc to run at incredible speeds resulting in better performance, faster input signals, and lower latency compared to older 8-bit escs. this esc also features a live telemetry connection for more advanced flight controllers, as well as a top-of-the-line current sensor.

heavy duty copper traces

one of the biggest features of this esc is the heavy-duty copper traces (8oz) which can support extreme current. additionally, the esc pcb is 2mm thick and layered on a 2nd pcb of 1mm for a total of 3mm. more copper along with the included aluminum heatsink allows you to push more power to your dronass.

benefits of blheli_32 firmware on 32-bit esc

32-bit processors run faster than 8-bit, at which we can expect better performance from the new 32-bit escs. faster input signals with lower latency and higher update rate would be possible, such as dshot1200 or even faster protocols! (read about dshot) (read about dshot1200)

the 32-bit platform also allows more functionality and features that simply weren’t possible on 8bit escs, such as:

• improved direction change in the bidirectional mode

• auto-timing for higher efficiency and reliability

• configuring from fc using dshot commands

• adjustable “brake on stop” force

• programmable pwm frequency

• voltage/current limiting

• rgb led control

• esc telemetry

• supports: dshot300, dshot600, dshot1200, multishot, oneshot, and normal ppm 1-2us.

• mounting patterns: 30.5×30.5m / 86x66mm

• processors: cortex m4 32-bit 120hz

• 16v bec onboard to power flight controller

• dimensions: 97mmx72mmx15mm

• continuous current: 100a x4 ch

• peak current: 120a x4 ch

• supports: pwm 8-48khz

• firmware: blheli_32

• mosfet: 100v, 1.5mω

• voltage: 6-12s

• weight: 113g

• download the user manual here

• download the latest blheli_32 configurator here.

• download the blheli_32 user manual here.

• 1x lumenier elite pro 100a v2 6-12s blheli_32 4-in-1 esc

• 2x 8pin jst breakout cable (short 70mm)

• 2x 8pin jst breakout cable (long 120mm)

• 2x 10awg 200°c wire – black / red 160mm

• 1x 63v 1800uf capacitor

• 5x m3 rubber grommets

• 1x plastic hardware set (m3 spacers, screws, nuts)